Care Instructions
1. Majlis Sofa — Fabric Upholstery
Daily & Weekly Care
• Vacuum regularly using a soft brush or upholstery attachment to remove dust and loose debris.
• Fluff and rotate seat and back cushions weekly to maintain even foam support and prevent permanent compression.
• Avoid sitting on armrests or standing on cushions, as this places uneven stress on the foam and frame.
Spills & Stains
• Blot spills immediately with a clean, absorbent cloth. Do not rub, as this pushes liquid deeper into the foam and spreads the stain.
• For water–based stains, use a mild soap solution and a soft cloth, working from the outside of the stain inwards.
• Test any cleaning solution on a hidden area (e.g. underside of a cushion) before applying it to a visible surface.
• Do not saturate the fabric with water. Excess moisture can seep into the foam and cause mildew or a lingering odour.
General Cleaning
• Engage a professional upholstery cleaning service at least once a year, or more frequently in high–use settings.
Camel Caravan offers this service. See details below.
• Keep the sofa out of direct, prolonged sunlight to prevent fading and premature weakening of the fabric fibres.
Environment
• Ensure adequate ventilation in the room, particularly in Singapore and Malaysia’s humid climate, to prevent moisture build–up within the foam.
• Avoid placing the sofa directly beneath air–conditioning vents, as constant airflow can dry and crack the fabric over time.
• Keep away from sharp objects, pins, or rough fabrics (e.g. denim) that may snag or tear the upholstery.
Note: If the sofa is used in a mosque or community hall setting with high foot traffic, more frequent vacuuming and an annual professional clean are recommended to preserve both appearance and hygiene.
Wash Instructions (Removable Covers)
• Unzip and remove covers carefully from the foam insert. Close all zips before washing to prevent snagging.
• Hand wash or use a gentle/delicate machine cycle in cold water (30°C or below).
• Use a mild detergent only. Do not use bleach or fabric softener, as these can weaken fibres and dull the colour.
• Do not wring or twist the cover. Press out excess water gently instead.
• Drip–dry in the shade, away from direct sunlight and heat. Do not tumble dry, as heat can shrink the cover and prevent it from fitting the foam insert properly.
• Re–fit the cover onto the foam insert only once it is completely dry, to prevent moisture from being trapped inside the foam.
Camel Caravan Cleaning Service
Camel Caravan provides a professional cleaning service for the majlis sofa, covering both fabric covers and foam inserts.
This is recommended for annual deep cleaning, stubborn stains, or high–traffic settings such as mosques and community halls.
To arrange a cleaning service, please contact our team directly at our hotline 8815 1459 (WhatsApp)
2. Mashrabiya & Mihrab Panels — PVC Panel
Routine Dusting
• Dust regularly with a soft, dry microfiber cloth to prevent build–up in the carved or lattice details.
• PVC surfaces can attract dust through static; a slightly damp (not wet) microfiber cloth will lift dust more effectively than a dry one.
• For intricate lattice sections, use a soft–bristled brush or a low–suction vacuum brush attachment to reach into recesses.
Cleaning
• Wipe with a damp cloth and a mild soap or detergent solution. PVC is water–resistant, so normal damp wiping will not damage the panel.
• Dry with a clean cloth after cleaning to avoid water spotting or streaking on the surface.
• Do not use solvent–based cleaners, thinners, acetone, or alcohol–based products — these will dissolve, soften, or dull the PVC surface.
• Avoid abrasive scrubbers or scouring pads, which can scratch the surface finish.
Environment & Placement
• Avoid prolonged direct sunlight. UV exposure over time can cause PVC to discolour, become brittle, or fade in colour.
• Keep away from direct heat sources (e.g. spotlights, heaters, or air–conditioning units blowing directly onto the panel). PVC will soften and can warp or deform if exposed to sustained high heat.
• PVC panels tolerate humidity well and will not swell or rot like timber–based materials, making them well suited to Singapore and Malaysia’s climate.
Handling & Maintenance
• Handle with care during cleaning or relocation; lattice and carved sections are decorative and thinner areas can crack or snap under repeated bending or impact.
• Check mounting brackets and fixings periodically to ensure the panel remains securely and evenly supported, without undue stress on any single point.
• Should any crack, chip, or breakage occur, discontinue further handling of that area and arrange for inspection/repair, as stress fractures can spread over time.
Note: Mihrab and mashrabiya panels installed in mosque settings are often positioned near entrances or windows. Extra attention to sun and heat exposure at these locations will help preserve the panel’s colour and finish.